Zenith CD4400 - 4 Channel Power Amplifier 2400W RMS

CD4400

Rated 5.0 out of 5
Based on 1 review

Buy Now Pay Later, or pay just £126.33 over 3 payments with Klarna Payment Badge

Or only £126.33 p/m over 3 months with - Learn more

£379Excl. VAT

Only 2 in stock!

Earn 1895 Sound Points!

Delivery of this amplifier is expected in July 2021.

When it comes to amplifying BishopSound speakers we do all the appropriate tests and our engineers crawl all over the technical aspects to guarantee perfect performance. Every speaker is tested with the recommended amplifier to guarantee perfect reproduction with no colouration or pollution.

Key Features:

  • Power output @ 8Ω: 4 x 400W rms
  • Power output @ 4Ω: 4 x 700W rms
  • Power output bridge @ 8Ω: 2 x 1200W rms
  • Protection circuits: Soft start, limit, thermal, short circuit, overload, DC fault protection, and AC power supply fuse
  • Frequency response: 20Hz to 20kHz
  • Input sensitivity: 0.775V, 32dB or 26dB
  • Damping factor: 250
  • Slew rate: 12V/uS
  • Min. Load impedance (Stereo): 4Ω
  • Min. Load impedance (Bridge): 8Ω
  • LED indicators: Power, active, signal and clip
  • Input connections: 4 x XLR sockets, 1 x powerCON mains input
  • Output connections: 4 x speakON connectors
  • Additional features: Switchable stereo, parallel and bridge
  • Power supply: 220-240V AC 50/60Hz
  • Power consumption: 530W (1/8 power @ 8Ω)
  • Dimensions: 88 x 483 x 460mm
  • Weight: 9.6kg

We choose only the very best and most reliable partners who give genuine warranties and have a service centre in the North of England! BishopSound Prefer Zenith for high power amplification and processors for our line array, subwoofers and point source speakers.

The CD4400 features high output power, outstanding sound quality and superior stability for a wide range of installed sound systems as well as portable live sound applications. This 4 channel amp with an RMS wattage of 4 x 700W @ 4 ohm features class D technology in a compact 2U package. Automatic clip limiting along with high-efficiency tunnel cooling and DC fans ensure reliability time after time.

Many speakers need amplifiers that are asked to deliver, on-demand repetitive punchy rhythms especially drum & bass but simply run out of steam as the power supply in the majority of class D amplification can not keep up with the demands of our 12" 15" & 18" drivers. This is why we chose this amp as the power supply delivers the energy needed to keep up with today's music.

  • Power output @ 8Ω: 4 x 400Wrms
  • Power output @ 4Ω: 4 x 700Wrms
  • Power output bridge @ 8Ω: 2 x 1200Wrms
  • Frequency response: 20Hz to 20kHz
  • Input sensitivity: 0.775V, 32dB or 26dB
  • Damping factor: 250
  • Slew rate: 12V/uS
  • Min. Load impedance (Stereo): 4Ω
  • Min. Load impedance (Bridge): 8Ω
  • Protection circuits: Soft start, limit, thermal, short circuit, overload, DC fault protection, and AC power supply fuse
  • LED indicators: Power, active, signal and clip
  • Input connections: 4 x XLR sockets, 1 x powerCON mains input
  • Output connections: 4 x speakON connectors
  • Additional features: Switchable stereo, parallel and bridge
  • Power supply: 220-240V AC 50/60Hz
  • Power consumption: 530W (1/8 power @ 8Ω)
  • Dimensions: 88 x 483 x 460mm
  • Weight: 9.6kg

Carton Information

  • Height (cm) 17.0
  • Width (cm) 52.0
  • Depth (cm) 52.0
  • Weight (kg) 11.6
  • Barcode 0090125501148
  • Qty In Outer 1

Powercon power cable not included

average rating 5.0 out of 5
Based on 1 review
  • 5 Stars
    1 Review
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
Review posted
Reviewed by Stephen D.
Verified Buyer
Rated 5 out of 5

5 Stars

Excellent amplifie

Loading...
I recommend this product
Was this helpful?

BishopSound Limited Lifetime Guarantee

Effective on all purchases from 1st January 2021

With a returns rate of less than 1% we are proud to offer the BishopSound Lifetime Guarantee at no extra cost to you

BishopSound Limited will undertake to guarantee the product will be free from defective workmanship and materials for the reasonable life of the product.

What is covered in the guarantee?

BishopSound Limited will at its discretion and expense either repair the defect using new or refurbished parts, or replace the Product with a new or re-manufactured Product of a reasonable equivalent. In all instances BishopSound Limited’s liability will not exceed the original Purchase Price.

What is not covered with the guarantee?

If we find a genuine fault or defect in your item that shouldn’t be there based on normal use, then we’ll repair or replace it for free– no questions asked. But, if that speaker has been unloved or beaten to within an inch of its life, then it might be time to buy a new one! In any case, we’ll review each case and will let you know if we can fix or replace it.

The warranty stated above is the sole and exclusive remedy and BishopSound Limited’s performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product. In any event, BishopSound Limited shall not be liable for and consequential, incidental, economic, property, bodily injury or personal injury damage arising from the product, any breach of the warranty or otherwise.

This Warranty applies to the first end-user purchaser, and only when purchased from BishopSound Direct or an authorized BishopSound Limited Dealer/Distributor on the UK Mainland listed on our website.

Additional Limitations and Exclusions from Warranty Coverage: The warranty described above is non-transferable, applies only to the Product purchased, does not include installation of any repaired or replaced Product, does not include damage to any allied or associated equipment which may result for any reason from use with this Product, and does not include labour or parts caused by accident, disaster, negligence, improper installation, broken warranty seals, misuse (e.g. over driving the amplifier or speaker, unstable, unprotected or badly earthed power sources, excessive heat or cold or humidity or inadequate ventilation), or from service or repair which has not been authorized by BishopSound Limited.

The end-user purchaser is liable for the cost of transportation and return of the Product in the original packaging. Any damages incurred during transport are the cost and responsibility of the end-user purchaser.

When purchasing BishopSound Limited products, please keep your receipt of purchase safe and retain all the original packaging, as this validates your warranty.

How To Claim

To qualify for the Lifetime warranty, in the first instance you must contact BishopSound Limited showing proof of purchase and the product code. You must be in possession of the original packing as this has the Serial Number printed on it. You will be asked for the serial number and given a return authorization number (RAN), which is required to progress with your warranty claim.

Any decision made by BishopSound Limited regarding any Lifetime Warranty claim is full and final.

How long is the product covered for?

To help give you an idea of our expected product lifetimes we’ve built a guidance table.

If no proof of purchase available product lifetime will be measured on date of manufacture.

Active Speakers - 5 years

Passive Speakers - 6 years

Power Amplifiers - 6 years

This warranty takes effect from the 1st January 2021 onward. Goods purchased prior to this date were sold with the 12 month warranty which still stands.

Only branded BishopSound Limited Products are included in the Lifetime Guarantee:

For more information, please see our Terms & Conditions

    Get in touch with BishopSound today for professional and friendly advice. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.

    If you have a question for Andrew use this form or Live Chat for a fast reply.