DAP HP-3000 Power Amplifier

HP-3000

Buy Now Pay Later, or pay just £133 over 3 payments with Klarna Payment Badge

Or only £133 p/m over 3 months with - Learn more

£399Excl. VAT
Earn 1995 Sound Points!
The HP-3000 represents the true heavy-duty machine in this series. This 3-step H-Class power amp is designed for use in larger venues and clubs. It delivers enough power to seriously shake the foundations and is ideal for Subwoofers or full range speakers.
Allow 7 Days for delivery please
  • Full protection circuits
  • Efficient Silent forced-air cooling
  • Stereo & Bridge mode

Key Feature:

  • Stereo 2Ohm: Not Allowed
  • Stereo 4Ohm: 2x 1400 Watt RMS
  • Stereo 8Ohm: 2x 1200 Watt RMS
  • Bridge 2Ohm: Not Allowed
  • Bridge 4Ohm: Not Allowed
  • Bridge 8Ohm: 1x2800 Watt RMS
  • Frequency Response: 10Hz - 20KHz, +/-1dB
  • Output Mode: Stereo / Parallel / Bridge
  • Amp Technology: Class H 3-STEP
  • Protection: Clip Limiter (Fixed)
  • Short Circuit Protection
  • Overheat Protection
  • Overload Protection
  • DC Voltage Protection
  • Cooling: Forced-air by axial fan
  • Airflow: Front to side
  • Input Connectors: 3-pin XLR
  • Output Connectors: Speakon
  • Power Connector: IEC
  • Input Voltage: 210~240VAC, 50/60Hz
  • Dimensions: 483 x 400 x 88mm
  • Weight: 17Kg


  • Stereo 2Ohm: Not Allowed
  • Stereo 4Ohm: 2x 1400 Watt RMS
  • Stereo 8Ohm: 2x 1200 Watt RMS
  • Bridge 2Ohm: Not Allowed
  • Bridge 4Ohm: Not Allowed
  • Bridge 8Ohm: 1x2800 Watt RMS
  • Frequency Response: 10Hz -20KHz, +/-1dB
  • THD: <0.5%
  • S/N rate: >100dB A-weighted
  • Crosstalk: >75dB
  • Damping Factor: >100 8 OHM
  • Gain: 36dB
  • Input Sensitivity: 0,775V (+/-1dBv)
  • Input Impedance: 20kOhm balanced, 10kOhm unbalanced
  • Output Mode: Stereo / Parallel / Bridge
  • Amp Technology: Class H 3-STEP
  • Protection: Clip Limiter (Fixed)
  • Short Circuit Protection
  • Overheat Protection
  • Overload Protection
  • DC Voltage Protection
  • Cooling: Forced-air by an axial fan
  • Airflow: Front to side
  • Input Connectors: 3-pin XLR
  • Output Connectors: Speakon
  • Power Connector: IEC
  • Input Voltage: 210~240VAC, 50/60Hz
  • Dimensions: 483 x 400 x 88mm
  • Weight: 17Kg

BishopSound Limited Lifetime Guarantee

Effective on all purchases from 1st January 2021

With a returns rate of less than 1% we are proud to offer the BishopSound Lifetime Guarantee at no extra cost to you

BishopSound Limited will undertake to guarantee the product will be free from defective workmanship and materials for the reasonable life of the product.

BishopSound Limited will at its discretion and expense either repair the defect using new or refurbished parts, or replace the Product with a new or re-manufactured Product of a reasonable equivalent. In all instances BishopSound Limited’s liability will not exceed the original Purchase Price.

If we find a genuine fault or defect in your item that shouldn’t be there based on normal use, then we’ll repair or replace it for free– no questions asked. But, if that speaker has been unloved or beaten to within an inch of its life, then it might be time to buy a new one! In any case, we’ll review each case and will let you know if we can fix or replace it.

The warranty stated above is the sole and exclusive remedy and BishopSound Limited’s performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product. In any event, BishopSound Limited shall not be liable for and consequential, incidental, economic, property, bodily injury or personal injury damage arising from the product, any breach of the warranty or otherwise.

This Warranty applies to the first end-user purchaser, and only when purchased from BishopSound Direct or an authorized BishopSound Limited Dealer/Distributor on the UK Mainland listed on our website.

Additional Limitations and Exclusions from Warranty Coverage: The warranty described above is non-transferable, applies only to the Product purchased, does not include installation of any repaired or replaced Product, does not include damage to any allied or associated equipment which may result for any reason from use with this Product, and does not include labour or parts caused by accident, disaster, negligence, improper installation, broken warranty seals, misuse (e.g. over driving the amplifier or speaker, unstable, unprotected or badly earthed power sources, excessive heat or cold or humidity or inadequate ventilation), or from service or repair which has not been authorized by BishopSound Limited.

The end-user purchaser is liable for the cost of transportation and return of the Product in the original packaging. Any damages incurred during transport are the cost and responsibility of the end-user purchaser.

When purchasing BishopSound Limited products, please keep your receipt of purchase safe and retain all the original packaging, as this validates your warranty.

How To Claim

To qualify for the Lifetime warranty, in the first instance you must contact BishopSound Limited showing proof of purchase and the product code. You must be in possession of the original packing as this has the Serial Number printed on it.You will be asked for the serial number and given a return authorization number (RAN), which is required to progress with your warranty claim.

Any decision made by BishopSound Limited regarding any Lifetime Warranty claim is full and final.

This warranty takes effect from the 1st January 2021 onward. Goods purchased prior to this date were sold with the 12 month warranty which still stands.

Only branded BishopSound Limited Products are included in the Lifetime Guarantee:

For more information, please see our Terms & Conditions

    Get in touch with BishopSound today for professional and friendly advice. Alternatively, you can call us on 01765 698 233 or 07973 223949. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.

    If you have a question for Andrew use this form or Live Chat for a fast reply.