BishopSound BP2k Power Amplifier 2000w

BP2K

Buy now, pay later, or spread your cost over 3 payments with Klarna

Free Mainland UK Delivery on all orders

£199Incl. VAT £299Incl. VAT

The BishopSound BP2k includes a number of features to give the best performance for all passive PA speakers. The amplifier runs quiet and cool in any rack.

The project to provide a cost-effective method of powering our passive speakers came about due to QSC, Crown, and others pricing their amplifiers beyond the reach of performers who are having to work on lower margins than ever before.

Our service centre is fully equipped to give detailed advice on configuration and set up. A complete manual comes with every amplifier.

The BishopSound BP2k weighs 3kg in 1u and operates 2 channels left and right and delivers 2 x 1000w RMS at 4 ohm.

Key Features:

  • 2 x 1000 Watts RMS into 4 Ohms
  • 2 x 500 Watts RMS into 8 Ohms
  • 1 x 1000Watts RMS into 8 Ohm Bridged
  • Intelligent fans switch in and out dependent on the heat generation automatically to ensure cool running
  • Limiters protect the BP2K from damage by moving to protect mode when THD is more than 0.5%
  • Each of the 2 channels has an independent clip, protect and signal indication.
  • Strong 1u rack ears for easy touring rack installation
  • 2 x XLR balanced Neutrik analogue audio inputs
  • 2 x NL4 Neutrik speakON output connectors

Built-in Protection Includes:

  • Soft Start
  • DC
  • Short Circuit
  • Overload
  • Distortion limiting
  • Overheating
  • VHF

For more details, help, and advice please message Andrew

  • 2 x 1000 Watts RMS into 4 Ohms
  • 2 x 500 Watts RMS into 8 Ohms
  • 1 x 1000Watts RMS into 8 Ohm Bridged
  • Intelligent fans switch in and out dependent on the heat generation automatically to ensure cool running
  • Limiters protect the BP2K from damage by moving to protect mode when THD is more than 0.5%
  • Each of the 2 channels has an independent clip, protect and signal indication.
  • Strong 1u rack ears for easy touring rack installation
  • 2 x XLR balanced Neutrik analogue audio inputs
  • 2 x NL4 Neutrik speakON output connectorsFrequency response: 20Hz - 20kHz (0.5~-1.2dB)
  • Total harmonic distortion: <0.05%
  • Signal to noise ratio: >98dB
  • Damping coefficient: >1000 (100Hz)
  • Resolution: >70dB
  • Conversion rate: >20V/ë_s
  • Input sensitivity: 1.0V
  • Input impedance: 10k/20 k
  • Voltage gain (8) 39dB 40.3dB 42.0dB 43.0dB
  • Amplifying circuit structure CLASS-D

Connection Input section: Balanced input XLR female socket, balanced and connected XLR male socket

Output section: NL4 type SPEAKON socket

Indicator panel Lights: Power, signal UV, peak clipping,

Front panel function: Power start switch, volume control knob, displays

Rear panel function Stereo, the parallel selection switch

Power supply: Removable standard power plug power cord AC220-240V/50Hz.å±10%

Weight 3kg

Product Dimensions 483x250x44

Your Guarantee is for 12 months and starts from delivery date but please read on. The warranty is recorded with the BishopSound Order number which begins with a B. Please download and keep a copy of your invoice and keep it safe.

We know problems can occur from time to time so even after 1 year I am here to help. We carry parts and we treat everyone as we expect to be treated ourselves so we will work hard to get a win win.

We still help people who bought from us at Carlsbro 30 years ago with parts (if they are available) repairs and solutions. BishopSound prides itself on treating every customer as a family friend.

In short if the problem was caused by me its up to me to fix it. If you had an accident then I will try my hardest to fix it at little or no cost to you. This guarantee is in addition to, and does not affect your statutory rights or the other right of consumer purchases.

For more information, please see our Terms & Conditions

    Get in touch with BishopSound today for professional and friendly advice. Alternatively, you can call us on 01765 698 233 or 07973 223949. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.

    If you have a question use this form or Live Chat and if you're interested in becoming an official distributor of BishopSound products, please get in touch below.

    You may also like

    Recently viewed