BishopSound 6 Channel Mixer For Live, Recorded Music, Touring, Studio or Live Streaming

BSM1

Buy Now Pay Later, or pay just £19.99 over 3 payments with Klarna Payment Badge

Or only £19.99 p/m over 3 months with - Learn more

Need it quicker? Choose next day delivery at checkout
£59.99Incl. VAT Our Price
£79.99Incl. VAT Typically This represents the average price across other brands that offer the same level of functionality and features as this product

Only 3 in stock!

Earn 295 Sound Points!

Popular easy to use 6 Channel Audio mixer for live or recorded music on tour or in your studio.

Key Features:

  • Easy to use on tour, studio or live streaming
  • Compatible with tablets, smartphones, Instruments, guitars, keyboards, digital drums, laptops, microphones, cd/tape or any music or sound source.
  • External Switch Mode Power supply provided
  • Phantom Power
  • 3 Band EQ on every channel
  • LED display
  • Connect outputs to amplifier, active speakers or midi recorder
  • Compact durable and 

Due to the variety of uses, we recommend following these points, with the reason to have better quality and maximum efficiency from your console.

Startup procedure:

  • Adjust all knobs in the minimum level
  • If you have connected an amplifier or speaker into the MAIN OUT connectors, adjust the MAIN MIX volume knob and the amplifier to a low level.
  • Connect speaker, earphones or amplifiers into the corresponding inputs.
  • Connect the microphones. Remember once that the console is on, you must to down the TRIM knob of the channels 1 and 2, each time that you connect or disconnect microphones or other devices.
  • Connect external audio devices (CD player, iPod, smartphones, etc.) into the input lines
  • Power the console using the eliminator: first connect it to the power supply and then to the console. The Plug connector has only one entry position marked by the notch; do not force the connection and secure it by screwing the nut.
  • Gradually increase the volume level of the channels and MAIN MIX, in order to listen to the audio signal. When the peak indicator of each channel lights, turn down the volume to obtain the best sound quality.
  • Use the EQ knobs to equalize the mixes.

  • Power input: 36 V~ 60 Hz 300 mA (2x 1 8 V~ 2 x 300 mA)
  • Microphone input: 20 mV unbalanced
  • Line input: 0.8 V unbalanced
  • Line output: 5 V max.
  • Earphone output: 300 mW @1% THD
  • THD: < 0.025% S/N vs max. output
  • Frequency response: 20 Hz - 20 kHz å± 1 dB
  • SNR: >80 dB
  • Power converter
  • Input: 240 V~ 50 Hz 38 W
  • Output: 36 V~ 50 Hz 300 mA (2 x 18 V~ 2 x 300 mA)
  • Specifications may change without previous notice
  • Don't expose the device to extreme temperatures.
  • Store the device in a dry warm place to avoid condensation.
  • Always use a soft and dry cloth to clean it.
  • Don't try to open the device, may cause malfunction and the warranty is avoid.
  • Don't use abrasive liquids to clean it.
  • Don't place heavy objects over the equipment.
  • Before to turn on the device ensures that the volume level controls are in the minimum level

See numbered image

1. MIC 1/MIC 2: Electronically balanced XLR type designed to accept signals from any balanced low impedance microphone. To avoid
damages, don't connect unbalanced microphones in these inputs.

2. LINE IN 1/LINE IN 2: 6.3 mm 

3. TRIM: Adjusts the input sensitivity of the mic and line inputs. The internal scale (+10 ~30 dB) corresponds to the musical instruments
or other devices, the external (0-40 dB) corresponds to the microphones.
- Turn the knob totally toward +10 position, each time that you connect or disconnect some device (MIC) or (LINE).

4. EQ: 3 band EQ. Set the frequency range on each input channels in 3 levels:
- Treble: Set the treble sounds, the range goes between -15 dB to +15 dB with a central frequency of 12 kHz.
- Mid: Set the frequencies from all musical instruments and the human voice. The gain range goes between -12 dB to +12 dB with a
central frequency of 2.5 kHz.
- Bass: The bass control set the male voice and the guitars or drums. The gain range goes between -15 dB to +15 dB with a central
frequency of 80 Hz.

5. FX: Allows give power to signals through of a variable from one or more channels and add it to the bus, having the output in the FX
SEND jack.

6. PAN: Send the audio signal. If you want that both channels (right, left) is listen, keep the knob of the middle. If you want that only
listen one, turn the knob to the corresponding side.

7. LEVEL: Set the overall level of the selected channel.

8. PHONES: Set the output signal level sent to the headphones.

9. MAIN MIX LEVEL: Set the signal level sent to the Main output or to RCA output.

10. PHANTOM POWER: This LED indicates when Phantom Power is on for condenser microphones.

11. AUX RETURN: Return the signal of an effect processor into the mixer. Only can be used as an additional stereo line input.

12. OUTPUT LEVEL: LED indicators of power level.

13. CD/ TAPE TO MIX: When the TAPE TO MIX switch is pressed, the input of 2 tracks are assigned to the main mix, providing
additional inputs for tape machines, MIDI instruments or other signal sources that do not require any processing.

14. CD/ TAPE TO PHONES: Allows monitoring the input of 2 tracks. This provides an easy way to monitor the signals that back from the
tape to ensure that is recording correctly.

15. CD/Tape IN RCA input to listen to the signal of digital audio tape or an audio player.

16. CD/Tape OUT: Send an RCA audio signal by RCA.

17. CTRL ROOM OUT: 6.3 mm with audio signal right and left, to the monitoring of the audio mixed track.

18. PHONES: 6.3 mm connector to earphones.

19. FX SEND: Send the received signal from the FX controls. It is possible to connect this output to the input of an external effects device
to process the master signal of the FX bus. Once a mix of effects is created, the processed signal can be routed from the outputs of the
effects devices to a stereo input.

20. STEREO AUX RETURN: 6.3 mm input to the return of FX effects unity.

21. MAIN OUT: Main audio outputs by 6.3 mm jack left and right. It is possible to connect to speakers or an audio amplifier or an
MD recorder.

22. LINE IN 5/6: 6.3 mm inputs, left and right for external devices such as audio players or instruments such as keyboards.

23. LINE IN 3/4: 6.3 mm inputs, left and right for external devices such as audio players or instruments such as keyboards.

Your Guarantee is for 12 months and starts from delivery date but please read on. The warranty is recorded with the BishopSound Order number which begins with a B. Please download and keep a copy of your invoice and keep it safe.

We know problems can occur from time to time so even after 1 year I am here to help. We carry parts and we treat everyone as we expect to be treated ourselves so we will work hard to get a win win.

We still help people who bought from us at Carlsbro 30 years ago with parts (if they are available) repairs and solutions. BishopSound prides itself on treating every customer as a family friend.

In short if the problem was caused by me its up to me to fix it. If you had an accident then I will try my hardest to fix it at little or no cost to you. This guarantee is in addition to, and does not affect your statutory rights or the other right of consumer purchases.

For more information, please see our Terms & Conditions

    Get in touch with BishopSound today for professional and friendly advice. Alternatively, you can call us on 01765 698 233 or 07973 223949. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.

    If you have a question for Andrew use this form or Live Chat for a fast reply.