BD215ADSP
- Fully Active dual 15'', two-way, bass-reflex speaker -no amplifier needed
- 139dB peak
- Stereo Bluetooth
- Full Function DSP Control Via Single Knob Interface
- Frequency Range 47Hz - 19kHz
- 2 Balanced XLR-1/4'' combi-jacks
- LCD Screen for Easy System Set-Up & Monitoring
- Power Rating 2000w Program
- 4 x Rubber isolation feet
- Four Coats of scratch and chip-proof PU paint
- Trapezoidal, 18mm, 13-ply birch marine plywood wooden enclosure
- Coverage 120° x 60° nominal
- Ergonomic Handles
- Countersunk Extra Thick "ding proof" grille to prevent grill damage when on tour
- Acoustic foam behind the grille to prevent moisture and dust ingression
- Padded Waterproof covers available
- Dimensions = 51 x 52 x 118 cm
- Weight = 39kg
BishopSound BDP15FR 15″ 600W RMS 8Ω FULL RANGE PROFESSIONAL CHASSIS DRIVER
- GENERAL CHARACTERISTICS
- Nominal Overall Diameter 395 mm Nominal Impedance 8 Ω
- Nominal Voice Coil Diameter 75 mm
- Magnet Weight 90 OZ
- Rated Power 600 W RMS 2400w PEAk
- Flux Density 1.2 T Sensitivity@1W/1m 94 d B
- Weight 12 Kg
- THIELE-SMALL PARAMETERS
- Voice Coil DC Resistance Re 5.6 Ω
- Resonance Frequency Fs 50 Hz
- Mechanical Q Factor Qms 13.6
- Electrical Q Factor Qes 0.82
- Total Q Factor Qts 0.77
- Mechanical Moving Mass Mms 109.7 g
- Mechanical Compliance Cms 88.5 um/N
- Force Factor BL 15.5 Wb/m
- Equivalent Acoustic Volume Vas 91.9 It.
- Maximum Linear Displacement Xmax ±4.5 mm
- Reference Efficiency ηo 1.520 %
- Diaphragm Area Sd 85.5 Cm2
- Losses Electrical Resistance Res Ω
- Voice Coil Inductance@ 1K Hz LE mh
- CONSTRUCTIVE CHARACTERISTICS
- Magnet Ferrite
- Voice Coil Winding Copper
- Voice Coil Former Kapton
- Cone Paper
- Surround Treated Cloth
- Dust Dome Paper
- Basket Diecast Aluminium
BD118AS
- Low-Frequency Driver: BishopSound BDP18'
- Amplifier Type: Class-D
- Power Output: RMS1000W
- Frequency Range: 30Hz - 300Hz, -10dB
- Frequency Response: 35Hz - 250Hz, å±3dB
- Sound Pressure Level: 135dB @ 1m Max SPL
- Audio Inputs: XLR/JACK 1/4" Combi
- Input Sensitivity: +4dBu @ 0dB
- Input Impedance: 12 kOhms Unbalanced / 24 kOhms Balanced
- Thru Connectors: XLR
- Output Impedance: 300 Ohms Unbalanced / 600 Ohms Balanced
- High-Pass Filter: 100Hz, Butterworth, 18dB Slope
- Level Control: -‰ö_ to +6dB
- High Cut Control: 70Hz - 150Hz, Butterworth, 24dB Slope
- Limiter: Optical
- Power Supply: 220V - 240V, 50Hz/60Hz
- Mains Connection: PowerCON IN/OUT
- 1m Powercon cables are included
- Dimensions: 58 x 67 x 73 cm
- Weight: 44Kg
- Trapezoidal, 18mm, 13-ply birch marine plywood wooden enclosure
- Countersunk Extra Tick "ding proof" grille to prevent grill damage when on tour
- Acoustic foam behind the grille to prevent moisture and dust ingression
BISHOPSOUND BDP18 SUB BASS WOOFER 18″ 1000W RMS FITTED IN THIS SUBWOOFER.
GENERAL CHARACTERISTICS
- Nominal Overall Diameter: 460 mm
- Nominal Voice Coil Diameter: 100 mm - 4 INCH
- Magnet Weight: 125 OZ
- Flux Density: 1.42 T
- Weight: 11.2 Kg
THIELE-SMALL PARAMETERS
- Voice Coil DC Resistance Re 5.6 Ω
- Resonance Frequency Fs 34.8 Hz
- Mechanical Q Factor Qms 11.48
- Electrical Q Factor Qes 0.57
- Total Q Factor Qts 0.543
- Mechanical Moving Mass Mms 202.6 g
- Mechanical Compliance Cms 103.05 um/N
- Force Factor BL 20.87 Wb/m
- Equivalent Acoustic Volume Vas 219.7 It.
- Maximum Linear Displacement Xmax ±7 mm
- Reference Efficiency ηo 1.575 %
- Diaphragm Area Sd 122.54 Cm2
- Losses Electrical Resistance Res Ω
- Voice Coil Inductance@ 1K Hz LE m H
ELECTRICAL CHARACTERISTICS
- Nominal Impedance 8 Ω
- Musical Power 2000 W
- Rated Power 1000 W
- Sensitivity@1W/1m 95 d B
CONSTRUCTION CHARACTERISTICS
- Magnet Ferrite
- Voice Coil Winding Copper
- Voice Coil Former Kapton
- Cone Paper - Made In England
- Surround Treated Cloth
- Dust Dome Paper
- Basket Die-Cast Aluminium
BishopSound Limited Lifetime Guarantee
Effective on all purchases from 1st January 2021
With a returns rate of less than 1% we are proud to offer the BishopSound Lifetime Guarantee at no extra cost to you.
BishopSound Limited will undertake to guarantee the product will be free from defective workmanship and materials for the reasonable life of the product.
BishopSound Limited will at its discretion and expense either repair the defect using new or refurbished parts, or replace the Product with a new or re-manufactured Product of a reasonable equivalent. In all instances BishopSound Limited’s liability will not exceed the original Purchase Price.
If we find a genuine fault or defect in your item that shouldn’t be there based on normal use, then we’ll repair or replace it for free– no questions asked. But, if that speaker has been unloved or beaten to within an inch of its life, then it might be time to buy a new one! In any case, we’ll review each case and will let you know if we can fix or replace it.
The warranty stated above is the sole and exclusive remedy and BishopSound Limited’s performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product. In any event, BishopSound Limited shall not be liable for and consequential, incidental, economic, property, bodily injury or personal injury damage arising from the product, any breach of the warranty or otherwise.
This Warranty applies to the first end-user purchaser, and only when purchased from BishopSound Direct or an authorized BishopSound Limited Dealer/Distributor on the UK Mainland listed on our website.
Additional Limitations and Exclusions from Warranty Coverage: The warranty described above is non-transferable, applies only to the Product purchased, does not include installation of any repaired or replaced Product, does not include damage to any allied or associated equipment which may result for any reason from use with this Product, and does not include labour or parts caused by accident, disaster, negligence, improper installation, broken warranty seals, misuse (e.g. over driving the amplifier or speaker, unstable, unprotected or badly earthed power sources, excessive heat or cold or humidity or inadequate ventilation), or from service or repair which has not been authorized by BishopSound Limited.
The end-user purchaser is liable for the cost of transportation and return of the Product in the original packaging. Any damages incurred during transport are the cost and responsibility of the end-user purchaser.
When purchasing BishopSound Limited products, please keep your receipt of purchase safe and retain all the original packaging, as this validates your warranty.
How To Claim
To qualify for the Lifetime warranty, in the first instance you must contact BishopSound Limited showing proof of purchase and the product code. You must be in possession of the original packing as this has the Serial Number printed on it.You will be asked for the serial number and given a return authorization number (RAN), which is required to progress with your warranty claim.
Any decision made by BishopSound Limited regarding any Lifetime Warranty claim is full and final.
This warranty takes effect from the 1st January 2021 onward. Goods purchased prior to this date were sold with the 12 month warranty which still stands.
Only branded BishopSound Limited Products are included in the Lifetime Guarantee:
For more information, please see our Terms & Conditions
Get in touch with BishopSound today for professional and friendly advice. Alternatively, you can call us on 01765 698 233 or 07973 223949. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.
If you have a question for Andrew use this form or Live Chat for a fast reply.
This Big Gig Rig Contains...
This Big Gig Rig can be driven with...
Big Gig Rig 26 - Active 4000w RMS Twin 15" Tops And 18" Subwoofer PA System With Bluetooth
BGR26
Earn 14980 Sound Points!
This Active Birch Plywood PA System is perfect for Live Bands and Professional DJ's and comprises of:
2 x Delta BD215ADSP Active 1000w RMS Active Twin 15" with DSP and Bluetooth
2 x Delta BD118AS 18" Active 1000w RMS 18" Subwoofers
Key Features:
- Sound for 2800+ Audience - Plug and play
- Fully Active System with Bluetooth and DSP
- 100% Long Lasting 18 and 13 ply Marine Birch Plywood
- 4 Coats of thick Jet Black PU paint on the subwoofer
- Glued Screwed and bolted BishopSound matched and voiced drivers
- BishopSound Cast Alloy purpose-designed drivers
- Heavy-Duty Recessed 16 gauge powder-coated grille with acoustic foam behind to prevent water ingression
- Point source - 120-degree x 60-degree Dispersion
- British Engineering - British Design - UK Stock
- British Made Waterproof Covers Available
- Full DSP on BD215ADSP
- 44.4mm NEO Titanium high-frequency compression driver
- 90 x 60 degree integral Elliptical Wave Guide for even high-frequency dispersion
BD215ADSP - The detail
Built to take the rigours of touring the 18mm (13 plies) birch marine plywood BishopSound dual 15" active 1000w Class D Digital active speaker with Digital Signal Processing (DSP) and V5.0 is simply awesome! We have recessed the grill and doubled its thickness, added 4 coats of high impact, textured jet black PU paint to withstand the inevitable bumps and knocks whilst on tour.
Point Source is often the preferred method of delivering sound as line array is not easy to set up. Combine this with any number of our single active 18" subwoofers and you have a system to blow the listener's minds! The Bluetooth is built into the speaker and allows 2 speakers to be connected to one device.
Loaded with our BRC175 100w RMS Compression Driver and a pair of my highly respected cast aluminium BDP15 (rated at 600w RMS) the drivers count for 1300w RMS giving you plenty of headroom to cope the peaks. This Bishopsound 2-way dual 15″ offers the perfect balance between performance and size. The BD215ADPS truly is an exceptional speaker; it’s versatile and powerful.
Watch out! Unlike BishopSound many makers do not quote the RMS and simply state Wattage. If it does not say RMS or AES it could be Program Power (RMSx2) or Peak (RMSx4) double-check with your maker.
Customers tell us this is louder and with many more features than the £1,260 JBL PRX825W, EV, QSC or Yamaha.
One compatible Bluetooth V5.0 device will drive 2 of these speakers in stereo or simply connect you your music source with an XLR cable or 1/4" jack, plug into the mains and away you go...
We hear from customers that you adore our superb British tone that we are known for. You will never be disappointed! Live bands love these speakers as they deliver such a broad range which is especially important!
If you do have an accident I carry all the spare parts in stock in Ripon North Yorkshire at a fair price. You can see the detailed specification of my drivers in the driver section on my website.
Loaded with our BRC175 100w RMS Compression Driver and a pair of highly respected cast aluminium BDP15 (rated at 600w RMS) the drivers count for 1300w RMS giving you plenty of headroom to cope the peaks. This Bishopsound 2-way dual 15" offers the perfect balance between performance and size. The BD215ADPS truly is an exceptional speaker; it۪s versatile and powerful.
Customers tell us this is louder and with many more features than the £1,260 JBL PRX825W, EV, QSC or Yamaha.
One compatible Bluetooth V5.0 device will drive 2 of these speakers in stereo or simply connect you your music source with an XLR cable or 1/4" jack, plug into the mains and away you go...
Self-powered dual 15'', two-way, bass-reflex speaker
- 139dB peak
- Full Function DSP Control Via Single Knob Interface
- Frequency Range 47Hz - 19kHz
- 2 Balanced XLR-1/4'' combi-jacks
- LCD Screen for Easy System Set-Up & Monitoring
- Power Rating 2000w Program
- Trapezoidal, 18mm, 13-ply birch marine plywood wooden enclosure
- Coverage 120 x 60nominal
- Countersunk grill to prevent grill damage when on tour
BD118A - Active 1000w RMS Subwoofer
The single 18" powered subwoofer incorporates the hugely sought after BDP18 1000w RMS cast alloy driver designed and engineered in the UK. The BDP18 has sales of over 1000 units and no re-cone kits have been needed (even though we carry them in stock).
The BB118AS delivers a minimum of 135dB SPL @1w/1m and has a frequency range of between 30Hz and 300Hz.
Two simple, uncomplicated potentiometers on the rear panel control the volume and low pass filter.
Channel A and Channel B can be fed by XLR or 1/4" jack and a link out allows you to feed the original signal to multiple active subwoofers or mid/top range active cabinets.
Key Features of the BD118AS
- Loaded with the famous Low-Frequency BishopSound BDP18 Driver 18''
- Amplifier Type: Class-D
- Volume control on the rear
- Frequency range control on the rear
- Power Output: 1000W RMS
- Frequency Range: 30Hz - 300Hz, -10dB
- Frequency Response: 35Hz - 250Hz
- Sound Pressure Level: 135dB Max SPL
- Audio Inputs: XLR/JACK 1/4" Combi
- Input Sensitivity: +4dBu @ 0dB
- Input Impedance: 12 kOhms Unbalanced / 24 kOhms Balanced
- Thru Connectors: XLR + Combi
- Output Impedance: 300 Ohms Unbalanced / 600 Ohms Balanced
- High-Pass Filter: 100Hz, Butterworth, 18dB Slope
- High Cut Control: 70Hz - 150Hz, Butterworth, 24dB Slope
- Limiter: Optical
- Power Supply: 220V - 240V, 50Hz/60Hz
- Mains Connection: PowerCON IN/OUT
- Dimensions: 58 x 67 x 73 cm
- Weight: 44Kg
- 1m Powercon cable is included
- Trapezoidal, 18mm, 13-ply birch marine plywood wooden enclosure
- Countersunk Extra Tick "ding proof" grille to prevent grill damage when on tour
- Acoustic foam behind the grille to prevent moisture and dust ingression
The 20a rating of the powercon exceeds the current needed thereby delivering greater safety and reliability.
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers (often referred to as kettle leads) wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
BD215ADSP
- Fully Active dual 15'', two-way, bass-reflex speaker -no amplifier needed
- 139dB peak
- Stereo Bluetooth
- Full Function DSP Control Via Single Knob Interface
- Frequency Range 47Hz - 19kHz
- 2 Balanced XLR-1/4'' combi-jacks
- LCD Screen for Easy System Set-Up & Monitoring
- Power Rating 2000w Program
- 4 x Rubber isolation feet
- Four Coats of scratch and chip-proof PU paint
- Trapezoidal, 18mm, 13-ply birch marine plywood wooden enclosure
- Coverage 120° x 60° nominal
- Ergonomic Handles
- Countersunk Extra Thick "ding proof" grille to prevent grill damage when on tour
- Acoustic foam behind the grille to prevent moisture and dust ingression
- Padded Waterproof covers available
- Dimensions = 51 x 52 x 118 cm
- Weight = 39kg
BishopSound BDP15FR 15″ 600W RMS 8Ω FULL RANGE PROFESSIONAL CHASSIS DRIVER
- GENERAL CHARACTERISTICS
- Nominal Overall Diameter 395 mm Nominal Impedance 8 Ω
- Nominal Voice Coil Diameter 75 mm
- Magnet Weight 90 OZ
- Rated Power 600 W RMS 2400w PEAk
- Flux Density 1.2 T Sensitivity@1W/1m 94 d B
- Weight 12 Kg
- THIELE-SMALL PARAMETERS
- Voice Coil DC Resistance Re 5.6 Ω
- Resonance Frequency Fs 50 Hz
- Mechanical Q Factor Qms 13.6
- Electrical Q Factor Qes 0.82
- Total Q Factor Qts 0.77
- Mechanical Moving Mass Mms 109.7 g
- Mechanical Compliance Cms 88.5 um/N
- Force Factor BL 15.5 Wb/m
- Equivalent Acoustic Volume Vas 91.9 It.
- Maximum Linear Displacement Xmax ±4.5 mm
- Reference Efficiency ηo 1.520 %
- Diaphragm Area Sd 85.5 Cm2
- Losses Electrical Resistance Res Ω
- Voice Coil Inductance@ 1K Hz LE mh
- CONSTRUCTIVE CHARACTERISTICS
- Magnet Ferrite
- Voice Coil Winding Copper
- Voice Coil Former Kapton
- Cone Paper
- Surround Treated Cloth
- Dust Dome Paper
- Basket Diecast Aluminium
BD118AS
- Low-Frequency Driver: BishopSound BDP18'
- Amplifier Type: Class-D
- Power Output: RMS1000W
- Frequency Range: 30Hz - 300Hz, -10dB
- Frequency Response: 35Hz - 250Hz, å±3dB
- Sound Pressure Level: 135dB @ 1m Max SPL
- Audio Inputs: XLR/JACK 1/4" Combi
- Input Sensitivity: +4dBu @ 0dB
- Input Impedance: 12 kOhms Unbalanced / 24 kOhms Balanced
- Thru Connectors: XLR
- Output Impedance: 300 Ohms Unbalanced / 600 Ohms Balanced
- High-Pass Filter: 100Hz, Butterworth, 18dB Slope
- Level Control: -‰ö_ to +6dB
- High Cut Control: 70Hz - 150Hz, Butterworth, 24dB Slope
- Limiter: Optical
- Power Supply: 220V - 240V, 50Hz/60Hz
- Mains Connection: PowerCON IN/OUT
- 1m Powercon cables are included
- Dimensions: 58 x 67 x 73 cm
- Weight: 44Kg
- Trapezoidal, 18mm, 13-ply birch marine plywood wooden enclosure
- Countersunk Extra Tick "ding proof" grille to prevent grill damage when on tour
- Acoustic foam behind the grille to prevent moisture and dust ingression
BISHOPSOUND BDP18 SUB BASS WOOFER 18″ 1000W RMS FITTED IN THIS SUBWOOFER.
GENERAL CHARACTERISTICS
- Nominal Overall Diameter: 460 mm
- Nominal Voice Coil Diameter: 100 mm - 4 INCH
- Magnet Weight: 125 OZ
- Flux Density: 1.42 T
- Weight: 11.2 Kg
THIELE-SMALL PARAMETERS
- Voice Coil DC Resistance Re 5.6 Ω
- Resonance Frequency Fs 34.8 Hz
- Mechanical Q Factor Qms 11.48
- Electrical Q Factor Qes 0.57
- Total Q Factor Qts 0.543
- Mechanical Moving Mass Mms 202.6 g
- Mechanical Compliance Cms 103.05 um/N
- Force Factor BL 20.87 Wb/m
- Equivalent Acoustic Volume Vas 219.7 It.
- Maximum Linear Displacement Xmax ±7 mm
- Reference Efficiency ηo 1.575 %
- Diaphragm Area Sd 122.54 Cm2
- Losses Electrical Resistance Res Ω
- Voice Coil Inductance@ 1K Hz LE m H
ELECTRICAL CHARACTERISTICS
- Nominal Impedance 8 Ω
- Musical Power 2000 W
- Rated Power 1000 W
- Sensitivity@1W/1m 95 d B
CONSTRUCTION CHARACTERISTICS
- Magnet Ferrite
- Voice Coil Winding Copper
- Voice Coil Former Kapton
- Cone Paper - Made In England
- Surround Treated Cloth
- Dust Dome Paper
- Basket Die-Cast Aluminium
BishopSound Limited Lifetime Guarantee
Effective on all purchases from 1st January 2021
With a returns rate of less than 1% we are proud to offer the BishopSound Lifetime Guarantee at no extra cost to you.
BishopSound Limited will undertake to guarantee the product will be free from defective workmanship and materials for the reasonable life of the product.
BishopSound Limited will at its discretion and expense either repair the defect using new or refurbished parts, or replace the Product with a new or re-manufactured Product of a reasonable equivalent. In all instances BishopSound Limited’s liability will not exceed the original Purchase Price.
If we find a genuine fault or defect in your item that shouldn’t be there based on normal use, then we’ll repair or replace it for free– no questions asked. But, if that speaker has been unloved or beaten to within an inch of its life, then it might be time to buy a new one! In any case, we’ll review each case and will let you know if we can fix or replace it.
The warranty stated above is the sole and exclusive remedy and BishopSound Limited’s performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product. In any event, BishopSound Limited shall not be liable for and consequential, incidental, economic, property, bodily injury or personal injury damage arising from the product, any breach of the warranty or otherwise.
This Warranty applies to the first end-user purchaser, and only when purchased from BishopSound Direct or an authorized BishopSound Limited Dealer/Distributor on the UK Mainland listed on our website.
Additional Limitations and Exclusions from Warranty Coverage: The warranty described above is non-transferable, applies only to the Product purchased, does not include installation of any repaired or replaced Product, does not include damage to any allied or associated equipment which may result for any reason from use with this Product, and does not include labour or parts caused by accident, disaster, negligence, improper installation, broken warranty seals, misuse (e.g. over driving the amplifier or speaker, unstable, unprotected or badly earthed power sources, excessive heat or cold or humidity or inadequate ventilation), or from service or repair which has not been authorized by BishopSound Limited.
The end-user purchaser is liable for the cost of transportation and return of the Product in the original packaging. Any damages incurred during transport are the cost and responsibility of the end-user purchaser.
When purchasing BishopSound Limited products, please keep your receipt of purchase safe and retain all the original packaging, as this validates your warranty.
How To Claim
To qualify for the Lifetime warranty, in the first instance you must contact BishopSound Limited showing proof of purchase and the product code. You must be in possession of the original packing as this has the Serial Number printed on it.You will be asked for the serial number and given a return authorization number (RAN), which is required to progress with your warranty claim.
Any decision made by BishopSound Limited regarding any Lifetime Warranty claim is full and final.
This warranty takes effect from the 1st January 2021 onward. Goods purchased prior to this date were sold with the 12 month warranty which still stands.
Only branded BishopSound Limited Products are included in the Lifetime Guarantee:
For more information, please see our Terms & Conditions
Get in touch with BishopSound today for professional and friendly advice. Alternatively, you can call us on 01765 698 233 or 07973 223949. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.
If you have a question for Andrew use this form or Live Chat for a fast reply.