Big Gig Rig 25 - Passive 3200w RMS 10" Tops And 18" Subwoofer PA System

BGR25

Buy now, pay later, or spread your cost over 3 payments with Klarna

Free Mainland UK Delivery on all orders

£1,199Incl. VAT

For touring or installation this PA system comprises of:

4 x BB110 Beta 10" Trapezoidal 300w RMS 8 Ohm Full Range Speakers

2 x BD118s Delta 18" Birch Plywood Passive 1000w RMS 8 Ohm Subwoofers

Fitting out a cinema, theatre, hall, pub, gym, club or studio the sound this system reproduces is clear, clean and crisp with plenty of punch when called upon.

For installation its simply one speaker in each corner and hide the subs under the stage.

The in/out Speakon speaker sockets on each 8 Ohm speaker mean easy linking and simple setups. The 10" speakers feature M8 flying points and a 35mm pole mount to make installation simple and fast. Wall brackets or T-Frames make life very simple.

The BishopSound 4 channel BP44K amplifier will drive this passive system with ease. Study the amplifier section of building your own bundle.

See https://bishopsound.com/tools/bundles/bundle/25681

T-Bars and M20 35mm telescopic poles are not included in this Big Gig Rig but can be purchased from our accessories section. 

BB110 - Summary

Constructed using our own specification Danish MDF for the perfect balance of tone and weight. The super tough paint finish and thick metal grille protect the speaker.

The tone is British and designed for our music. Watch your customers sit up and listen to our amazing clarity of tone. Read the stunning technical specifications of the cabinet which houses my superb BDP10 Cast alloy 63cm double wound voice coil.

Key Features

  • 3mm Rust-resistant Powder Coated Grille
  • Trapezoidal design
  • 2-way full-range loudspeaker and stage monitor for portable PA applications
  • Genuine 300 Watts RMS 600 Watts continuous, 1,200 Watts peak power
  • 4 Coats of durable PU chip-proof paint
  • High excursion 10" low-frequency BDP10 Cast Alloy BishopSound driver with low mass voice coil for improved transient response
  • Titanium dome 34.4mm 70w RMS compression driver with extended high-frequency reproduction BRC135 Made By BishopSound
  • Low distortion waveguide provides 90 x 60
  • Rugged powder-coated 3mm thick perforated steel mesh grille
  • Top handle for easy lifting and carrying
  • 35mm pole mount for accurate audience coverage
  • Neutrik Speakon NL4 connectors in/out for reliable long-life operation

Beta Speakers are perfect for all applications where you want a warm and crystal clear "British Tone" NOT the Chinese, German, Italian or American tone. We have been making the Beta Speakers for over 30 years and our ears love them because we hear every note.

Experience the sensational British tone of the Trapezoidal BETA B110 Listen, feel the warmth and enjoy hearing every note projected with British precision.

BB110

  • 300W (RMS) / 1200W (peak) power handling
  • British Designed 10''/1'' full range mid/high unit
  • Horn dispersion (90° x 60°)
  • 10'' low/mid speaker with 2.5" Inside/ outside windings copper voice coil
  • BRC135 1'' Titanium HF driver with a 1.35'' voice coil
  • Maximum SPL of up to 127dB 
  • Fitted with our BDP10 driver
  • Rugged birch multiplex/MDF hybrid enclosure
  • RMS: 300W
  • Program: 600W
  • Peak: 1200W
  • Nominal Impedance: 8 Ohms
  • Frequency Response: 58Hz - 20kHz
  • Protection Crossover
  • Connections: 2 x SpeakON NL4 in and out
  • Pole Mount: 35mm
  • Rigging Points: 10 x M8
  • Handles: Top Cut Out
  • Enclosure: Hybrid (birch multiplex / MDF)
  • Grille: 2mm metal grille backed with black acoustic foam
  • Finish: Acrylic enamel, black
  • 10'', two-way, point source speaker
  • Max SPL 127dB peak
  • Trapezoidal, 15mm wooden enclosure
  • Countersunk Extra Tick "ding proof" grille to prevent grill damage when on tour
  • Acoustic foam behind the grille to prevent moisture and dust ingression
  • Weight = 12kg
  • Dimensions  = 31cm x 33cm x 53cm

The Driver in the BB110 is our BDP10

THIELE SMALL PARAMETERS

  • FS Hz 58 Hz
  • RE Ohms 5.7 Ohms
  • Qms 6.08
  • Qes 0.33
  • Qts 0.313
  • Vas Litres 41
  • Vd Litres 0.208
  • CMS mm/N 0.211
  • BL T/m 15.3
  • Mms g 37
  • Xmax mm 5.5
  • Sd cm2 378
  • Efficiency % 2.36

ELECTRO-ACOUSTIC SPECIFICATIONS:

  • Nominal Chassis Diameter 10" / 254 mm
  • Impedance 8 Ohms
  • Power Handling 300 w (A.E.S.)
  • Peak Power (6dB Crest Factor) 1200 w (A.E.S.)
  • Usable Frequency Range -6dB 45 Hz - 5 kHz
  • Sensitivity (1 w - 1 m) 97.5 dB
  • Moving Mass inc. Air Load 37 grams
  • Minimum Impedance Zmin 6.8 Ohms
  • Effective Piston Diameter 214.88 mm / 8.46"
  • Peak Displacement Volume of Cone Vd 0.2 litres
  • Magnet Weight 56 oz
  • Magnetic Gap Depth 10 mm / 0.39"
  • Flux Density 1.0 Tesla
  • Coil Winding Height 18 mm / 0.70"

The HF is driven with our BRC135

ELECTRICAL CHARACTERISTICS

  • Nominal Overall Diameter 90 mm
  • Nominal Impedance 8 ½
  • Nominal Voice Coil Diameter 34.4 mm
  • RMS Power 70 W
  • Magnet Weight <350g
  • Flux Density 0.75 T
  • Sensitivity@1W/1m 106 dB
  • Weight 32 Ounces or 907.185 gram
  • 35mm Thread

THIELE-SMALL PARAMETERS

  • Voice Coil DC Resistance Re 6.2 ½
  • Resonance Frequency Fs 1300 Hz

CONSTRUCTION CHARACTERISTICS

  • Magnet Ferrite
  • Voice Coil Winding CCAW
  • Voice Coil Former Kapton
  • Voice Coil Winding
  • Height 2.4 mm
  • Diaphragm: Titanium
  • Air Gap Height 5 mm
  • Ferrofluid in Air Gap: No
  • Throat Diameter 25mm

BD118 - Specifications

  • 18mm 13 ply Marine Birch Plywood Cabinet
  • Covered with 4 coats of BishopSound PU heavy-duty chip-proof paint
  • Extra Thick ding proof metal grill
  • Acoustic Foam Behind Grill to Prevent Water and Dust Ingression
  • System Type 18" Passive (Subwoofer)
  • Loaded with BishopSound BDP18
  • Frequency Range 34~150 Hz
  • Impedance 8 OHM
  • Power RMS (W) 1000
  • Power PROG (W) 2000 (4000w Peak)
  • LF (Power/Sensitivity) 1000w/134dB
  • Max SPL (dB) 134dB
  • Cross over (Hz) +/-100hz
  • Connection 4 Pole connector x 2 (in and out)
  • Water-resistant Speakon upload backplate
  • Cabinet size 58*67*73 cm
  • Carton size 63*72*78 cm
  • Product Weight 42Kg
  • Top Hat 20mm threaded Inverted in top of the cabinet for pole mount

Loaded in this subwoofer the BishopSound BDP18 18″ Sub-bass woofer 1000w RMS

GENERAL CHARACTERISTICS
  • Nominal Overall Diameter: 460 mm
  • Nominal Voice Coil Diameter: 100 mm
  • Magnet Weight: 125 OZ
  • Flux Density: 1.42 T
  • Weight: 11.2 Kg
THIELE-SMALL PARAMETERS
  • Voice Coil DC Resistance Re 5.6 Ω
  • Resonance Frequency Fs 34.8 Hz
  • Mechanical Q Factor Qms 11.48
  • Electrical Q Factor Qes 0.57
  • Total Q Factor Qts 0.543
  • Mechanical Moving Mass Mms 202.6 g
  • Mechanical Compliance Cms 103.05 um/N
  • Force Factor BL 20.87 Wb/m
  • Equivalent Acoustic Volume Vas 219.7 It.
  • Maximum Linear Displacement Xmax ±7 mm
  • Reference Efficiency ηo 1.575 %
  • Diaphragm Area Sd 122.54 Cm2
  • Losses Electrical Resistance Res Ω
  • Voice Coil Inductance@ 1K Hz LE m H
ELECTRICAL CHARACTERISTICS
  • Nominal Impedance 8 Ω
  • Musical Power 2000 W
  • Rated Power 1000 W
  • Sensitivity@1W/1m 95 d B
CONSTRUCTION CHARACTERISTICS
  • Magnet Ferrite
  • Voice Coil Winding Copper
  • Voice Coil Former Kapton
  • Cone Paper - Made In England
  • Surround Treated Cloth
  • Dust Dome Paper
  • Basket Die-Cast Aluminium

 

Your Guarantee is for 12 months and starts from delivery date but please read on. The warranty is recorded with the BishopSound Order number which begins with a B. Please download and keep a copy of your invoice and keep it safe.

We know problems can occur from time to time so even after 1 year I am here to help. We carry parts and we treat everyone as we expect to be treated ourselves so we will work hard to get a win win.

We still help people who bought from us at Carlsbro 30 years ago with parts (if they are available) repairs and solutions. BishopSound prides itself on treating every customer as a family friend.

In short if the problem was caused by me its up to me to fix it. If you had an accident then I will try my hardest to fix it at little or no cost to you. This guarantee is in addition to, and does not affect your statutory rights or the other right of consumer purchases.

For more information, please see our Terms & Conditions

    Get in touch with BishopSound today for professional and friendly advice. Alternatively, you can call us on 01765 698 233 or 07973 223949. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.

    If you have a question use this form or Live Chat and if you're interested in becoming an official distributor of BishopSound products, please get in touch below.

    This Big Gig Rig Contains...

    You may also like

    Recently viewed