10" Speaker 250w RMS Full Range Driver 8 ohm Pressed Steel - BSP10

BSP10

Buy Now Pay Later, or pay just £11.66 over 3 payments with Klarna Payment Badge

Or only £11.66 p/m over 3 months with - Learn more

Need it quicker? Choose next day delivery at checkout
£34.99Incl. VAT

Only 8 in stock!

Earn 170 Sound Points!

This is our Classic 10" Pressed Steel Driver delivering 500w Program or 250w RMS at 8 ohms. This driver will peak at 1,000 watts

The 38mm voice coil and 34 Ounce magnet with our British paper cone truly makes all the difference to the sound quality.

We make all our drivers in our own factory. no middlemen at BishopSound!

  • We only use British Paper Cones - Not recycled old paper and cardboard
  • We guarantee our work!
  • 38mm voice coil.
  • 34 Oz Magnet
  • Goes down to 
  • Can be used effectively for Hi-Fi and PA
  • Smooth frequency response that gives a tone character when properly matched with our BRC135 HF unit
  • We focus on reliability and quality. The prices are fair because we are the manufacturer.
  • The BishopSound Classic range of Pressed Steel drivers come in 8", 10", 12" and 15"

    Our Classic 10″ PA speakers can be used in a range of cabinets both wood and plastic.

    Bishopsound woofers are high-quality PA speakers. Made from professional grade materials the Classic Series features pressed steel baskets, Kapton coils, ferrite magnets, paper cones from ENGLAND with rolled cloth edge and push terminals.

    These 10″ speakers are ideal for use in vocal PA, keyboards, club systems and monitors.

    BishopSound 10" Speakers are critical in covering those midrange frequencies.

    These 10" speakers are ideal for use in vocal PA, keyboards, club systems, and stage monitors.

    BishopSound 10″ Speakers are critical in covering those midrange frequencies.

    These 10″ speakers are ideal for use in vocal PA, keyboards, club systems, and stage monitors.

    Please note there is a printing error on the label of some drivers. This driver is 250w RMS, not 200w RMS, therefore, Program Power is 500w and 1000w peak.

    THIELE-SMALL PARAMETERS

    • Voice Coil DC Resistance Re 5.6 ½
    • Resonance Frequency Fs 58 Hz
    • Mechanical Q Factor Qms 5.6
    • Electrical Q Factor Qes 0.59
    • Total Q Factor Qts 0.53
    • Mechanical Moving Mass Mms 22 g
    • Mechanical Compliance Cms 210 um/N
    • Force Factor BL 11.2 Wb/m
    • Equivalent Acoustic Volume Vas 38.4 It.
    • Maximum Linear Displacement Xmax å±2 mm
    • Reference Efficiency ëáo 1.3 %
    • Diaphragm Area Sd 35.2 Cm2
    • Losses Electrical Resistance Res ½
    • Voice Coil Inductance@ 1K Hz LE m

        GENERAL CHARACTERISTICS

        • Nominal Overall Diameter 260 mm
        • Usable Frequency Range -6dB 45 Hz - 5 kHz
        • Nominal Impedance 8 ohm
        • Nominal Voice Coil Diameter 38 mm
        • Front Mounting baffle cut-out = 232 mm
        • Musical Power 500 W
        • Magnet Weight 34 Oz
        • Rated Power 250 W RMS
        • Flux Density 0.85 T Sensitivity@1W/1m 93 d B
        • Weight 3.2 Kg

        CONSTRUCTION

        • Magnet Ferrite
        • Voice Coil Winding Copper
        • Voice Coil Former Kapton
        • British Paper Cone
        • Surround Treated Cloth
        • Dust Dome Paper
        • Basket Pressed Sheet Steel

        BishopSound Limited Lifetime Guarantee

        Effective on all purchases from 1st January 2021

        With a returns rate of less than 1% we are proud to offer the BishopSound Lifetime Guarantee at no extra cost to you

        BishopSound Limited will undertake to guarantee the product will be free from defective workmanship and materials for the reasonable life of the product.

        BishopSound Limited will at its discretion and expense either repair the defect using new or refurbished parts, or replace the Product with a new or re-manufactured Product of a reasonable equivalent. In all instances BishopSound Limited’s liability will not exceed the original Purchase Price.

        If we find a genuine fault or defect in your item that shouldn’t be there based on normal use, then we’ll repair or replace it for free– no questions asked. But, if that speaker has been unloved or beaten to within an inch of its life, then it might be time to buy a new one! In any case, we’ll review each case and will let you know if we can fix or replace it.

        The warranty stated above is the sole and exclusive remedy and BishopSound Limited’s performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product. In any event, BishopSound Limited shall not be liable for and consequential, incidental, economic, property, bodily injury or personal injury damage arising from the product, any breach of the warranty or otherwise.

        This Warranty applies to the first end-user purchaser, and only when purchased from BishopSound Direct or an authorized BishopSound Limited Dealer/Distributor on the UK Mainland listed on our website.

        Additional Limitations and Exclusions from Warranty Coverage: The warranty described above is non-transferable, applies only to the Product purchased, does not include installation of any repaired or replaced Product, does not include damage to any allied or associated equipment which may result for any reason from use with this Product, and does not include labour or parts caused by accident, disaster, negligence, improper installation, broken warranty seals, misuse (e.g. over driving the amplifier or speaker, unstable, unprotected or badly earthed power sources, excessive heat or cold or humidity or inadequate ventilation), or from service or repair which has not been authorized by BishopSound Limited.

        The end-user purchaser is liable for the cost of transportation and return of the Product in the original packaging. Any damages incurred during transport are the cost and responsibility of the end-user purchaser.

        When purchasing BishopSound Limited products, please keep your receipt of purchase safe and retain all the original packaging, as this validates your warranty.

        How To Claim

        To qualify for the Lifetime warranty, in the first instance you must contact BishopSound Limited showing proof of purchase and the product code. You must be in possession of the original packing as this has the Serial Number printed on it.You will be asked for the serial number and given a return authorization number (RAN), which is required to progress with your warranty claim.

        Any decision made by BishopSound Limited regarding any Lifetime Warranty claim is full and final.

        This warranty takes effect from the 1st January 2021 onward. Goods purchased prior to this date were sold with the 12 month warranty which still stands.

        Only branded BishopSound Limited Products are included in the Lifetime Guarantee:

        For more information, please see our Terms & Conditions

          Get in touch with BishopSound today for professional and friendly advice. Alternatively, you can call us on 01765 698 233 or 07973 223949. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.

          If you have a question for Andrew use this form or Live Chat for a fast reply.