Zenith CD5000 - 2 Channel Power Amplifier 5000W RMS

CD5000

Rated 5.0 out of 5
Based on 1 review

Buy Now Pay Later, or pay just $269.33 over 3 payments with Klarna Payment Badge

Or only $269.33 p/m over 3 months with - Learn more

$808Excl. VAT

Seulement 1 exemplaire in stock !

The CD5000 features high output power, outstanding sound quality and superior stability for a wide range of installed sound systems as well as portable live sound applications.

This 2 channel amp with an RMS wattage of 5000W features class D technology in a compact 2U package.

Key Features:

  • Power output @ 8Ω: 2 x 1000Wrms
  • Power output @ 4Ω: 2 x 1700Wrms
  • Power output @ 2Ω: 2 x 2500Wrms
  • Power output bridge @ 8Ω: 1 x 3400Wrms
  • Power output bridge @ 4Ω: 1 x 5000Wrms
  • Frequency response: 20Hz to 20kHz
  • Min. Load impedance (Stereo): 2Ω
  • Min. Load impedance (Bridge): 4Ω
  • Protection circuits: Soft start, limit, thermal, short circuit, overload, DC fault protection, and AC power supply fuse
  • LED indicators: Power, active, signal and clip
  • Input connections: 2 x XLR sockets, 1 x powerCON mains input
  • Output connections: 2 x speakON connectors and 2 pairs of binding posts
  • Additional features: Switchable stereo, parallel and bridge and switchable low cut filters (30Hz, 50Hz, and OFF)
  • Power supply: 220-240V AC 50/60Hz

 Automatic clip limiting along with high-efficiency tunnel cooling and DC fans ensure reliability time after time.

  • Power output @ 8Ω: 2 x 1000Wrms
  • Power output @ 4Ω: 2 x 1700Wrms
  • Power output @ 2Ω: 2 x 2500Wrms
  • Power output bridge @ 8Ω: 1 x 3400Wrms
  • Power output bridge @ 4Ω: 1 x 5000Wrms
  • Frequency response: 20Hz to 20kHz
  • Input sensitivity: 1.2V, 32dB or 26dB
  • Damping factor: 200
  • Slew rate: 22V/uS
  • Min. Load impedance (Stereo): 2Ω
  • Min. Load impedance (Bridge): 4Ω
  • Protection circuits: Soft start, limit, thermal, short circuit, overload, DC fault protection, and AC power supply fuse
  • LED indicators: Power, active, signal and clip
  • Input connections: 2 x XLR sockets, 1 x powerCON mains input
  • Output connections: 2 x speakON connectors and 2 pairs of binding posts
  • Additional features: Switchable stereo, parallel and bridge and switchable low cut filters (30Hz, 50Hz, and OFF)
  • Power supply: 220-240V AC 50/60Hz
  • Power consumption: 1200W (1/8 power @ 8Ω)
  • Dimensions: 88 x 483 x 460mm
  • Weight: 9.5kg
  • Carton Information
  • Height (cm) 18.0
  • Width (cm) 57.0
  • Depth (cm) 52.0
  • Weight (kg) 10.5
  • Barcode 0090125501124
  • Qty In Outer 1


Powercon power cable not included

average rating 5.0 out of 5
Based on 1 review
  • 5 Stars
    1 Review
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
1 Review
Reviewed by Richard B., from United Kingdom
Verified Buyer
I recommend this product
Age Range
45 - 54
Customer Type
DJ
Customer Service
Went Above & Beyond
Value For Money
Excellent
Rated 5 out of 5
Review posted

Prompt delivery hassle free informative

Great gear from a top shop which i didn't know existed, and would have got all my equipment from there,. I stumbled across YouTube and found the shop and purchased 3 power amplifiers which i most say are top of the range equipment.

The advice I was given was spot on it wasn't fabricated like most shops I have spoken to and I say again I wished I have known about Bishop sounds earlier this would have saved alot of money and its great getting all of your dj gear from on supplier.

I bought the zenith 13k

Zenith cd 5000

And the bishopsound 3000w amplifier.

Loading...
Was this helpful?

BishopSound Limited Lifetime Guarantee

Effective on all purchases from 1st January 2021

With a returns rate of less than 1% we are proud to offer the BishopSound Lifetime Guarantee at no extra cost to you

BishopSound Limited will undertake to guarantee the product will be free from defective workmanship and materials for the reasonable life of the product.

What is covered in the guarantee?

BishopSound Limited will at its discretion and expense either repair the defect using new or refurbished parts, or replace the Product with a new or re-manufactured Product of a reasonable equivalent. In all instances BishopSound Limited’s liability will not exceed the original Purchase Price.

What is not covered with the guarantee?

If we find a genuine fault or defect in your item that shouldn’t be there based on normal use, then we’ll repair or replace it for free– no questions asked. But, if that speaker has been unloved or beaten to within an inch of its life, then it might be time to buy a new one! In any case, we’ll review each case and will let you know if we can fix or replace it.

The warranty stated above is the sole and exclusive remedy and BishopSound Limited’s performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product. In any event, BishopSound Limited shall not be liable for and consequential, incidental, economic, property, bodily injury or personal injury damage arising from the product, any breach of the warranty or otherwise.

This Warranty applies to the first end-user purchaser, and only when purchased from BishopSound Direct or an authorized BishopSound Limited Dealer/Distributor on the UK Mainland listed on our website.

Additional Limitations and Exclusions from Warranty Coverage: The warranty described above is non-transferable, applies only to the Product purchased, does not include installation of any repaired or replaced Product, does not include damage to any allied or associated equipment which may result for any reason from use with this Product, and does not include labour or parts caused by accident, disaster, negligence, improper installation, broken warranty seals, misuse (e.g. over driving the amplifier or speaker, unstable, unprotected or badly earthed power sources, excessive heat or cold or humidity or inadequate ventilation), or from service or repair which has not been authorized by BishopSound Limited.

The end-user purchaser is liable for the cost of transportation and return of the Product in the original packaging. Any damages incurred during transport are the cost and responsibility of the end-user purchaser.

When purchasing BishopSound Limited products, please keep your receipt of purchase safe and retain all the original packaging, as this validates your warranty.

How To Claim

To qualify for the Lifetime warranty, in the first instance you must contact BishopSound Limited showing proof of purchase and the product code. You must be in possession of the original packing as this has the Serial Number printed on it. You will be asked for the serial number and given a return authorization number (RAN), which is required to progress with your warranty claim.

Any decision made by BishopSound Limited regarding any Lifetime Warranty claim is full and final.

How long is the product covered for?

To help give you an idea of our expected product lifetimes we’ve built a guidance table.

If no proof of purchase available product lifetime will be measured on date of manufacture.

Active Speakers - 5 years

Passive Speakers - 6 years

Power Amplifiers - 6 years

This warranty takes effect from the 1st January 2021 onward. Goods purchased prior to this date were sold with the 12 month warranty which still stands.

Only branded BishopSound Limited Products are included in the Lifetime Guarantee:

For more information, please see our Terms & Conditions

    Get in touch with BishopSound today for professional and friendly advice. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.

    If you have a question for Andrew use this form or Live Chat for a fast reply.

    Our PA helpline is open between 10am and 6pm Monday to Friday on +44(0)1765 698233

    You may also like

    Recently viewed