BP2K

BishopSound BP2k Power Amplifier 2000w

BishopSound BP2k Power Amplifier 2000w
BishopSound BP2k Power Amplifier 2000w
bishopsound-bp4k-power-amplifier-4000w-rms-5
bishopsound-bp4k-power-amplifier-4000w-rms-2
bishopsound-bp4k-power-amplifier-4000w-rms-3
BishopSound BP2k Power Amplifier 2000w
BishopSound BP2k Power Amplifier 2000w
bishopsound-bp4k-power-amplifier-4000w-rms-5
bishopsound-bp4k-power-amplifier-4000w-rms-2
bishopsound-bp4k-power-amplifier-4000w-rms-3
BP2K

BishopSound BP2k Power Amplifier 2000w

Precio habitual
$300.00(incl. VAT) $250.00
/

Compre ahora y pague después, o pague en 3 plazos de $83.33 (excl. VAT) con

Key Features:

  • 2 x NL4 Neutrik speakON output connectors
  • 1 x 1000w RMS into 8 Ohm bridged
  • 2 x 500w RMS into 8 Ohm
  • 2 x 1000w RMS into 4 Ohm
View full product specifications
  • Inventario en el camino

Este producto es para pedido por adelantado, por lo que habrá un tiempo de entrega más largo en las entregas.


The BishopSound BP2K includes a number of features to give the best performance for all passive PA speakers. The amplifier runs quiet and cool in any rack. Critically silent when powered up but with no signal.

The musicality of this amplifier beats most HiFi power amplifiers and monoblocks. I even use mine at home on a pair of Epos ES14 it's like driving a Ferrari in a 30 mph limit, smooth, stable and very sophisticated.

Key Features:

  • 2 x 1000 Watts RMS into 4 Ohms
  • 2 x 500 Watts RMS into 8 Ohms
  • 1 x 1000Watts RMS into 8 Ohm Bridged
  • Intelligent fans switch in and out dependent on the heat generation automatically to ensure cool running
  • Limiters protect the BP2K from damage by moving to protect mode when THD is more than 0.5%
  • Each of the 2 channels has an independent clip, protect and signal indication.
  • Strong 1u rack ears for easy touring rack installation
  • 2 x XLR balanced Neutrik analogue audio inputs
  • 2 x NL4 Neutrik speakON output connectors

Built-in Protection Includes:

  • Soft Start
  • DC
  • Short Circuit
  • Overload
  • Distortion limiting
  • Overheating
  • VHF

Designed to run down to 200v at which point the amplifier will go into protect mode. As soon as the voltage is restored you will be able to use the amplifier again. This is important if you are running a power amplifier off a generator with an unstable power regulator.

Always use a power conditioner with this product for your safety and to ensure your expensive PA is protected. See Power Conditioners – BishopSound

1U amplifiers must be kept cool!  High-speed fans are built-in but the only source of airflow is from the front vents so it is of the utmost importance to check monthly and keep these clean and free from clogging up with dust and dirt.

The project to provide a cost-effective method of powering our passive speakers came about due to QSC, Crown, and others pricing their amplifiers beyond the reach of performers who are having to work on lower margins than ever before.

For more details, help, and advice please message Andrew

Dimensiones

  • Boxed depth:27.0 cm
  • Boxed height:11.0 cm
  • Boxed width:53.0 cm
  • Unboxed depth:25.0 cm
  • Unboxed height:5.0 cm
  • Unboxed weight:3.0 kg
  • Unboxed width:48.0 cm
  • Boxed weight: 3.6 kg

Especificaciones

  • RMS Power: 2000w
  • 2 x 1000w RMS into 4 Ohm
  • Resolution: >70dB
  • Conversion Rate: >20V/ë_s
  • Input Sensitivity: 1.0v
  • Input Impedance: 10k/20k
  • Voltage Gain (8): 39dB 40.3dB 42.0dB 43.0dB
  • Limiters protect the BP2K from damage by moving to protect mode when THD is more than 0.5%
  • Intelligent fans switch in and out dependent on the heat generation automatically to ensure cool running
  • Connection Input Section: Balanced input XLR female socket, balanced and connected XLR male socket
  • Output Section: NL4 type speakON socket
  • Power Supply: Removable standard power plug power cord AC220-240V/50Hz
  • 2 x 500w RMS into 8 Ohm
  • Each of the 2 channels has an independent clip, protect and signal indication
  • 1 x 1000w RMS into 8 Ohm bridged
  • 2 x NL4 Neutrik speakON output connectors
  • 2 x XLR balanced Neutrik analogue audio inputs
  • Frequency Response: 20Hz - 20kHz (0.5~-1.2dB)
  • Total Harmonic Distortion: <0.05%
  • Signal To Noise Ratio: >98dB
  • Damping Coefficient: >1000 (100Hz)
average rating 4.9 out of 5
Based on 10 reviews
  • 5 Stars
    9 Reviews
  • 4 Stars
    1 Review
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
10 Reviews
Reviewed by andrew w., from United Kingdom
Verified Buyer
I recommend this product
Age Range
65+
Customer Type
DJ
Customer Service
Went Above & Beyond
Value For Money
Excellent
Rated 5 out of 5
Review posted

BishopSound BP2k Power Amplifier 2000w

Excellent amplifier for the money. Lightweight and extremely powerful and crystal clear

Loading...
Was this helpful?
Reviewed by andrew w., from United Kingdom
Verified Buyer
I recommend this product
Age Range
65+
Customer Type
DJ
Customer Service
Went Above & Beyond
Value For Money
Excellent
Rated 5 out of 5
Review posted

Bishopsound BP2k power amp

Excellent product, very light weight and packs quite a punch. Very happy with my purchase and I will be buying another one shortly.

Loading...
Was this helpful?
Reviewed by Lee A., from United Kingdom
Verified Buyer
I recommend this product
Age Range
45 - 54
Customer Type
Musician/Band
Customer Service
Good
Value For Money
Good
Rated 5 out of 5
Review posted

Great service

We already had one of these amps so when we needed another it was an easy choice..

Great service as usual

Loading...
Was this helpful?
Reviewed by Keith A., from United Kingdom
Verified Buyer
I recommend this product
Age Range
65+
Customer Type
DJ
Customer Service
Went Above & Beyond
Value For Money
Excellent
Rated 5 out of 5
Review posted

ĶrazeeeKaraooke

Absolutely brilliant amp

Loading...
Was this helpful?
Reviewed by Samuel G.
Verified Buyer
I recommend this product
Rated 4 out of 5
Review posted

4 Stars

Best amplifier

Loading...
Was this helpful?
Garantía de por vida
Estamos tan seguros de la calidad y durabilidad de nuestros productos, que ofrecemos una garantía de por vida BishopSound como estándar en todos los productos BishopSound. Así que puedes comprar con confianza y saber que tu equipo está protegido de por vida. Se aplican las condiciones generales.
CENTRO DE APOYO Y DISTRIBUCIÓN EN EL REINO UNIDO
Todos nuestros productos se entregan desde nuestro centro de distribución central en el Reino Unido para garantizar una entrega rápida. Además, con una red de ingenieros de servicio experimentados y conocedores a su disposición, puede estar tranquilo sabiendo que hay un equipo de servicio al cliente dedicado en todo momento.
¿Por qué elegir British Sound?
Durante la década de 1960, una generación de bandas británicas arrasó en las listas de éxitos de todo el mundo, llevando consigo no sólo su música, sino también un "sonido británico" muy característico derivado de la amplificación y los altavoces que utilizaban. Los altavoces BishopSound reproducen la calidez del sonido británico a través de su innovador catálogo de productos de alta calidad, garantizando un sonido perfecto para cada lugar y actuación en directo.
Visto recientemente