10" Speaker 350w RMS Woofer Replacement Driver With Cast Alloy Basket and Faston Terminals 8 ohm - BDP10


Rated 5.0 out of 5
Based on 1 review

This product is for pre-order, so there will be a longer lead time on deliveries.

Buy Now Pay Later, or pay just $22.33 over 3 payments with Klarna Payment Badge

Or only $22.33 p/m over 3 months with - Learn more

$67Excl. VAT

This BishopSound 10″ Cast Alloy Basket Speaker is a strong and ultra-reliable speaker that covers the midrange frequencies.

Our 10″ PA speakers can be used in a range of cabinets. Do not be put off by the size, these 10" drivers are amazing and take much more than 350w RMS, 700w Program Power in the right enclosure.

Bishopsound woofers are high-quality PA speakers using a cast aluminium chassis. Made from professional grade materials the Premium Series features Kapton coils, ferrite magnets, paper cones from England with rolled cloth edge and push terminals.

These 10″ speakers are ideal for use in vocal PA, keyboards, club systems, and stage monitors.

We focus on reliability and quality. The prices are fair because we are the manufacturer.
  • Cast Aluminium Basket
  • Faston Terminals and 50 Ounce Magnet
  • Top Quality British Designed components
  • We make all our drivers in our own factory.
  • We only use British Paper Cones!
  • We guarantee our work!
  • It can be used in 2 way ported enclosures such as the classic bass driver plus horn tweeter or compression driver format.
  • 2.5-Inch Inside/ outside windings copper voice coil.
  • It can be used effectively for PA or bass guitar applications.
  • Smooth frequency response that gives a tone character when properly matched with our BRC135 HF unit
  • Best suited for 15-40 Litre ported enclosure designs.

BishopSound 10" Speakers are critical in covering those midrange frequencies. Our 10" PA speakers can be used in a range of cabinets.

Mounting Information

  • Overall Diameter 261 mm
  • Bolt Hole Centres on diagonal = 243mm
  • Baffle Hole (Front Mount) 251 mm
  • Flange Height 7 mm / 0.27"
  • Mounting Hole Quantity and Diameter 4 x 6.5 mm
  • Mounting Hole P.C.D. 246.88 mm
  • Overall Height 113 mm / 4.44"
  • Nett Weight 4.85 kg
  • Packing Carton Dimensions 150 x 280 x 280 mm
  • Shipping Weight 5.45 kg

Thiele Small Parameters

  • FS Hz 58 Hz
  • RE Ohms 5.7 Ohms
  • Qms 6.08
  • Qes 0.33
  • Qts 0.313
  • Vas Litres 41
  • Vd Litres 0.208
  • CMS mm/N 0.211
  • BL T/m 15.3
  • Mms g 37
  • Xmax mm 5.5
  • Sd cm2 378
  • Efficiency % 2.36

Electro-Acoustic Specifications:

  • Nominal Chassis Diameter 10" / 254 mm
  • Impedance 8 Ohms
  • Voice Coil 3"
  • Power Handling 350 w (A.E.S.)
  • Peak Power (6dB Crest Factor) 1200 w (A.E.S.)
  • Usable Frequency Range -6dB 45 Hz - 5 kHz
  • Sensitivity (1 w - 1 m) 100 dB
  • Moving Mass inc. Air Load 37 grams
  • Minimum Impedance Zmin 6.8 Ohms
  • Effective Piston Diameter 214.88 mm / 8.46"
  • Peak Displacement Volume of Cone Vd 0.2 litres
  • Magnet Weight 50 oz
  • Magnetic Gap Depth 10 mm / 0.39"
  • Flux Density 1.0 Tesla
  • Coil Winding Height 18 mm / 0.70"
average rating 5.0 out of 5
Based on 1 review
  • 5 Stars
    1 Review
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
1 Review
Reviewed by Peter G.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

5 Stars

Although i have not used mine yet i have heard bishopsound speakers and was impressed enough to purchase these drivers for my custom pa system.

the units look very good quality and are very well made.

should you need replacement drivers you won't be disappointed with these..

Was this helpful?

BishopSound Limited Lifetime Guarantee

Effective on all purchases from 1st January 2021

With a returns rate of less than 1% we are proud to offer the BishopSound Lifetime Guarantee at no extra cost to you

BishopSound Limited will undertake to guarantee the product will be free from defective workmanship and materials for the reasonable life of the product.

What is covered in the guarantee?

BishopSound Limited will at its discretion and expense either repair the defect using new or refurbished parts, or replace the Product with a new or re-manufactured Product of a reasonable equivalent. In all instances BishopSound Limited’s liability will not exceed the original Purchase Price.

What is not covered with the guarantee?

If we find a genuine fault or defect in your item that shouldn’t be there based on normal use, then we’ll repair or replace it for free– no questions asked. But, if that speaker has been unloved or beaten to within an inch of its life, then it might be time to buy a new one! In any case, we’ll review each case and will let you know if we can fix or replace it.

The warranty stated above is the sole and exclusive remedy and BishopSound Limited’s performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product. In any event, BishopSound Limited shall not be liable for and consequential, incidental, economic, property, bodily injury or personal injury damage arising from the product, any breach of the warranty or otherwise.

This Warranty applies to the first end-user purchaser, and only when purchased from BishopSound Direct or an authorized BishopSound Limited Dealer/Distributor on the UK Mainland listed on our website.

Additional Limitations and Exclusions from Warranty Coverage: The warranty described above is non-transferable, applies only to the Product purchased, does not include installation of any repaired or replaced Product, does not include damage to any allied or associated equipment which may result for any reason from use with this Product, and does not include labour or parts caused by accident, disaster, negligence, improper installation, broken warranty seals, misuse (e.g. over driving the amplifier or speaker, unstable, unprotected or badly earthed power sources, excessive heat or cold or humidity or inadequate ventilation), or from service or repair which has not been authorized by BishopSound Limited.

The end-user purchaser is liable for the cost of transportation and return of the Product in the original packaging. Any damages incurred during transport are the cost and responsibility of the end-user purchaser.

When purchasing BishopSound Limited products, please keep your receipt of purchase safe and retain all the original packaging, as this validates your warranty.

How To Claim

To qualify for the Lifetime warranty, in the first instance you must contact BishopSound Limited showing proof of purchase and the product code. You must be in possession of the original packing as this has the Serial Number printed on it. You will be asked for the serial number and given a return authorization number (RAN), which is required to progress with your warranty claim.

Any decision made by BishopSound Limited regarding any Lifetime Warranty claim is full and final.

How long is the product covered for?

To help give you an idea of our expected product lifetimes we’ve built a guidance table.

If no proof of purchase available product lifetime will be measured on date of manufacture.

Active Speakers - 5 years

Passive Speakers - 6 years

Power Amplifiers - 6 years

This warranty takes effect from the 1st January 2021 onward. Goods purchased prior to this date were sold with the 12 month warranty which still stands.

Only branded BishopSound Limited Products are included in the Lifetime Guarantee:

For more information, please see our Terms & Conditions

    Get in touch with BishopSound today for professional and friendly advice. If you want to send a direct email please use andrew@bishopsound.com or victoria@bishopsound.com.

    If you have a question for Andrew use this form or Live Chat for a fast reply.

    Our PA helpline is open between 10am and 6pm Monday to Friday on +44(0)1765 698233

    You may also like

    Recently viewed