2 x Beta Twin 18" Active Powered Subwoofer 3000w RMS System Mk II
Product Code : BB218SA-BP
Ready for dispatch in 30 days
This pair of twin BB218SA are much louder than a pair of single 18" active subwoofers.
For those who prefer not to carry amp racks a pair BB218SA is the perfect choice. You can use these stood upright without troubling the power amplifier. We have thrown away the standard push in IEC kettle leads and added PowerCON push and twist power inputs to prevent cable kick outs and ensure a safe, secure and clean connection.
This bundle contains:
- Beta Twin 18" Active Powered Subwoofer 1500w RMS - Mark II
Total individual selling price: £1,998.00 incVAT
Bundle Saving: £199.00 incVAT
This pair of twin 18" BB218AS each pump out a minimum of 139dB SPL @1w/1m and has a frequency range of between 28Hz and 280Hz.
Two simple, uncomplicated potentiometers on the rear of each panel control the volume and low pass filter. Simply plug in and play.
Each of the Twin 18" powered sub woofers incorporate a pair of the hugely sought after BDP18 1000w RMS cast alloy woofers designed and engineered in the UK. The BDP18 has sales of over 1,000 units and no re-cone kits have been needed. Reliability and durability is at the heart of everything we do!
Channel A and Channel B can be fed by XLR or 1/4" jack and a link out allows you to feed the original signal to multiple active sub woofers or mid/top range active cabinets.
A major benefit of Bishopsound Active Subwoofer Range is the Genuine Neutrik PowerCON IN/OUT through connector. All to often mains IEC power leads are kicked out or fall out in the middle of a gig. Locking mains cables for ground level Bishopsound active subwoofers are essential.
The 20a rating of the powercon exceeds the current needed thereby delivering greater safety and reliability.
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers (often referred to as kettle leads) wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
Here are some more details. Please refer to the technical specifications for more detail or call Andrew on 07973223949.
BB218AS Specifications Per Cabinet
Low Frequency Driver: 2x18'' BishopSound BDP18
Amplifier Type: Class-D
Power Output: 1500W RMS
Frequency Range: 28Hz - 280Hz, -10dB
Frequency Response: 30Hz - 250Hz, ±3dB
Sound Pressure Level: 134dB @ 1m Max SPL
Audio Inputs: XLR or 1/4" Jack
Input Sensitivity: +4dBu @ 0dB
Input Impedance: 12 kOhms Unbalanced / 24 kOhms Balanced
Audio Outputs: XLR
Thru Connectors: XLR
Output Impedance: 300 Ohms Unbalanced / 600 Ohms Balanced
High-Pass Filter: 100Hz, Butterworth, 18dB Slope
Level Control: -∞ to +6dB
High Cut Control: 70Hz - 150Hz, Butterworth, 24dB Slope
Power Supply: 220V - 240V, 50Hz/60Hz
Mains Connection: Powercon
Dimensions: 73.5X60.5X128 Cm
Weight: 69 Kg
Please note: This professional speaker comes with fused Powercon to 13amp UK plug cable.
- Rated Power
- 3000w RMS
- Connectors: Inputs
- XLR or 1/4" Jacks
- Rear Controls
- Volume and Low Pass Pots
- Indicators: Signal
- Mains Connector
- PowerCON In/Out
- Indicators: Power
- Input Sensitivity
- +4dBu @ 0dB
- Minimum Impedance
- 12 kOhms Unbalanced / 24 kOhms Balanced
- Power Supply
- 220V - 240V, 50Hz/60Hz
- Frequency Range
- 28Hz - 280Hz, -10dB
- High Density 700–720 kg/m3 (Denser than plywood) Premium Quality Moisture Resistant MDF
- Max SPL (dB)
- Minimum 139dB
- 60cm x 128cm x 74cm
You may also be interested in...
No amplifier needed just plug & play perfect for bands & DJs
Cover Fits BishopSound Dual 18" Active Subwoofer BB218AS