BishopSound BP4k Power Amplifier 4000w RMS
Production ready immediately
This BishopSound Amplifier is made in the North of England and comes with a 12 months warranty.
The BishopSound BP4K is perfect for the Bishopsound full range speakers and the BB115S or BB118S subwoofers. If you are driving dual 15", 18" or 21" subs please consider the 4 channel BP10Q or the 2 channel BP14K amplifiers.
The project to provide a cost effective method of powering our passive speakers came about due to QSC, Crown and others pricing their amplifiers beyond the reach of event companies who are having to work on lower margins than ever before to secure work.
Our service center is fully equipped to give detailed advice on configuration and set up. A complete manual comes with every amplifier.
The BishopSound BP4k weighs 3kg and operates 2 channels. The BP4k delivers 2 x 1000w at 8 ohm or 2 x 2000w at 4 ohm and finally 1 x 3600w into 4 ohm in bridge mode.
The BishopSound BP4k includes a number of features to give the best performance for our speakers.
- 2 x 1000 Watts into 8 Ohms
- 2 x 2000 Watts into 4 Ohms
- 1 x 3600 Watts into 4 Ohms Bridged
- Intelligent fans switch in and out dependent on the heat generation automatically to ensure cool running
- Limiters protect the BP4K from damage by moving to protect mode when THD is more than 0.5%
- Each of the 2 channels has independent clip, protect and signal indication.
- Strong 1u rack ears for easy touring rack installation
- 2 x XLR balanced Neutrik analogue audio inputs
- 2 NL4 Neutrik speakON output connectors
- Made in England
For more details, help and advice please email firstname.lastname@example.org
Frequency response: 20Hz–20kHz (0.5~-1.2dB)
Total harmonic distortion: <0.05%
Signal to noise ratio: >98dB
Damping coefficient: >1000 (100Hz)
Conversion rate: >20V/μs
Input sensitivity: 1.0V
Input impedance: 10kΩ/20 kΩ
Voltage gain (8Ω) 39dB 40.3dB 42.0dB 43.0dB
Amplifying circuit structure CLASS-D
- Soft Start
- Short Circuit
- Distortion limiting
Connection Input section: Balanced input XLR female socket, balanced and connected XLR male socket
Output section: NL4 type SPEAKON socket
Indicator panel Lights: Power, signal UV, peak clipping,
Front panel function: Power start switch, volume control knob, displays
Rear panel function Stereo, parallel selection switch
Power supply: Removable standard power plug power cord AC220-240V/50Hz.±10%
Product Dimensions 483x250x44
- Rated Power
- RMS - 2 x 1000w@8Ω - 2 x 2000w@4Ω - Bridge Mode = 1 x 3600w@4Ω
- Frequency Response
- 20Hz - 20KHz
- THD at 1kHz
- Signal To Noise Ratio
- Coefficient of Damping
- >1000 (100Hz)
- Conversion Rate
- ≤ 20V/µs
- Input Resistance
- 10K Ω / 10K Ω
- Input Sensitivity
- 25cm x 48.3cm x 4.4cm
You may also be interested in...
2xBB112 & 2xBB115S deliver a full range sound for 700 people
2 BB110 & 2 BB115S deliver a full range sound for 600 people
Delivering 4000w of peak power, per speaker