Free Delivery Available On All UK Mainland Orders

Behringer KM1700 Power Amplifier 1700w RMS

Product Code: KM1700

9 Available

Ready for dispatch in 7 working days

The Behringer KM1700 Power Amplifier is a professional quality stereo amplifier engineered to produce an incredible 1700-watts of output power.  With switchable limiters, the KM1700 features an integrated overload protection component for reliable, efficient operation. Accurate power, signal and clip LEDs make monitoring easy whilst XLR and 1/4-inch TRS input connectors make the KM1700 compatible with any source. This impressive amount of power is possible thanks to the accelerated transient response which provides a truly natural and crisp sound to the audience.

£299.00 incVATRRP

£199.00 incVATSale Price

This amp will drive these full range cabs BB112, BB115, BB312, BB215

This amp will drive these subs BB115S

Class H Reliable Amp Design

Delivering incredibly tight and natural sound, the KM1700 power amp features a revolutionary accelerated transient response with rail tracking. Transient response is where the woofer cone matches bass tones and reacting accordingly to create sounds with maximum clarity. The rail tracking technology modulates the power supply rails with the peaks of the input signal for an efficient performance.

Simple Operation

The front panel of the KM1700 is home to the critical controls of the power amp such as the power button and the power LED indicator to show when the device is active. Each channel features gain controls with signal LEDs and clip LEDs, both showing when a signal is connected and when the input level needs to be reduced. The rear panel features the XLR, 1/4'' TRS and unbalanced 1/4'' TS connections for flexible compatibility. To connect speakers, users can choose between professional locking speaker outputs (SpeakOn) or the touch-proof binding posts. The rear panel also contains switches for mono, stereo and mono bridge mode as well as the limiter on/off switch which activates the integrated overload protection component.

Features

  • 2 x 800-watts into 4 Ω; 2 x 500-watts into 8Ω; 1700-watts into 8Ω; (bridge mode)
  • Accelerated transient response technology Switchable limiters offer maximum output level with reliable overload protection
  • Precise power, signal & clip LEDs
  • XLR & 1/4'' TRS input connectors
  • Professional speaker connectors & 'touch-proof' binding posts support variety of speaker wiring systems
  • Independent DC & short circuit protection on each channel
  • High-current toroidal transformer
  • 'Front-to-back' ventilation
  • Impact resistant housing & all-steel 2U rackmount chassis

Specifications

  • Maximum Output Power
    • 8Ω Per Channel, Both Channels Driven: 500W
    • 4Ω Per Channel, Both Channels Driven: 800W
    • 8Ω, Bridge Mode: 1700W
  • Connectors
    • Inputs: 2 x XLR, 2 x 1/4'' TRS
  • Input Impedance
    • XLR / 1/4'' TRS: 20kΩ Balanced / 10kΩ Unbalanced
    • Outputs: 2 x Locking-Style Professional Speaker Connector, Binding Post
  • System
    • Output Circuit Type: Class-H, Complementary Linear Output
    • Circuit Protection: Short Circuit Current, DC Fault, AC Fuse, Limiter, Thermal Cut
    • Distortion: <0.03 Percent
    • Damping Factor: >120 @ 8Ω
    • Frequency Response (@ -10 dB Below Rated Output Power): 20Hz to 20kHz, +0/-0.5 dB
    • Frequency Response (@ -3 dB): 10Hz to 80kHz
    • Signal-To-Noise: >100 dB (Unweighted, 20Hz to 20kHz)
    • Voltage Gain @ Level Control Max: 35.6 dB
    • Input Sensitivity@ Level Control Max: 0.77 V / 26 dB / 1.4 V, Switchable
  • Controls
    • Front: Power Switch, Level Control
    • Rear: Sensitivity, Limiter, Ground/Lift, Mode Switch
  • Indicators
    • Power: White LED
    • Signal: Green LED
    • Clip: Red LED
    • Protection: Yellow LED
    • Mono Mode: Yellow LED
    • Bridge Mode: Yellow LED
  • Power Supply
    • USA/Canada: 120V, 60Hz
    • UK/Australia/Europe: 220-240V, 50/60Hz
    • Korea/China: 220-240V, 50/60Hz
    • Japan: 100V, 50/60Hz
  • Power Consumption @ 1/8 Rated Power: 500W
  • Mains Connection: Standard IEC Receptacle
  • Weight: 12.5 kg
  • Dimensions
    • Height: 88 mm
    • Width: 482 mm
    • Depth: 375 mm
Power RMS
1700w RMS
Weight
12.5kg
Dimensions
9cm x 48cm x 38cm

Website by

Currency Selection

Show prices in £s or Euros?

VAT Display

Show prices with or without VAT?